New goods. New services. Petron Industries, Inc. http://1610.us.all.biz Sat, 25 Feb 2012 11:19:33 +0200 http://www.all.biz/img/logo.gif http://1610.us.all.biz http://www.us.all.biz/g585/ • Gives precision pressure indication for blowout Preventors and Mud Manifolds. Excellent for cementing, fracturing, acidizing and gravel packing. • Pointer position gives you good indication of pressure changes even when you are too far away to read the numbers. • High quality materials provide rugged construction and long life. • Precision movement with close ratio gears gives smooth, accurate readings. • External check valve makes it quick and easy to load. • Tee handle damper makes adjusting damping simple, requiring no tools. • Gauge case filled with HY-C fluid to dampen movement and lubricate.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g585/ http://www.us.all.biz/g587/ Hook load and weight on bit are possibly the most important parameters of the drilling process. At today’s cost of drilling it is imperative that drilling contractors work at the maximum efficiency. The Weight Indicator enables the driller to drill a straighter hole, at the maximum rate of penetration, with the most bit life. It is also essential to other operations such as milling, coring and fishing. It consists of a weight indicator gauge, sensator load cell and connecting hoses. The sensato is attached to the deadline anchor. This rugged 16" weight indicator gauge consists of two concentric dials and two pointers. The inner dial, a yellow pointer indicates the TOTAL HOOK LOAD; the outer vernier dial utilizes a white pointer to indicate WEIGHT ON BIT during drilling.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g587/ http://www.us.all.biz/g589/ Mud Pump Pressure is extremely important to the drilling process. The Mud Pump Pressure Gauge enables the driller to monitor the pressure while drilling. Any unusual change in pressure will alert the driller of down hole problems. Pressure too low could indicate washed out pipe or bit nozzle, loose joint or broken drill string, worn pump packing or liners, or lost returns due to formation breakdown. Pressure too high could indicate a plugged drill bit or an increase in mud density or viscosity. Reliable indication of mud pump pressure provides an early warning of circulation problems, enabling the driller to make corrections avoiding major problems.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g589/ http://www.us.all.biz/g591/ Each bit manufacturer has a RPM range to get the maximum rate of penetration and bit life out of their products. With the proper instrumentation, the driller can narrow the RPM range to obtain optimum performance. Petron’s Rotary Table Tachometer is the tool to use. Its precision RPM gauge, in conjunction with the rugged all stainless steel Tach-Generator, offers many years of trouble free service. The generator requires no outside power source. It works without brushes or contacts that can cause sparks or create wear. Instead, a permanent magnet revolving in a field generates an electrical signal proportional to rotary RPM.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g591/ http://www.us.all.biz/g593/ The Rotary Torque Indicator receives a signal from the idler assembly installed against the bottom of the rotary chain or secondary chain in the drawworks. This assembly acts as a lever (consisting of a free turning hard rubber wheel that deflects the chain and a hydraulic cylinder) that transmits the force applied to the indicating gauge mounted in front of the driller. As torque is built up in the drill string, the rotary chain becomes more taut and presses down on the wheel turning in the idler frame, and increases the psi within the hydraulic piston. This pressure signal is carried from the piston by a high-pressure hose to the dial indicating gauge mounted in the drilling control box/panel.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g593/ http://www.us.all.biz/g595/ The most frequent cause of drill string failure is incorrect make up. By accurately and consistently monitoring the make up torque, the driller can dramatically reduce the number of failures. The Tong Torque is a 5" instrument which works in conjunction with a load cell mounted in the line connected to one of the tongs. As each joint is made up, line pull is converted to a hydraulic pressure signal within the cylinder. This is transmitted to the gauge. The gauge has a target pointer and gives the driller an accurate and reliable measurement of the make up of each component in the drill string.]]> Tue, 08 May 2007 00:00:00 +0300 http://www.us.all.biz/g595/